Price: ₹22,999 - ₹14,066.00
(as of May 23,2023 20:34:48 UTC – Details)
Complete Air Conditioner Flush Tool Set
1x Empty Stainless Steel Canister with 1/4″ NPT American Air Plug and 1/4″ SAE Hose Adapter
1x 3-1/2FT Hose with 1/4″ Female Fittings
1x Flush Gun with Rubber Tapered Tip
1x Spare Rubber Tapered Tip
1x Spare 1/4″ NPT European Air Plug Fittings
1x Spare 1/4″ SAE Brass Hose Adapter
2x Spare Rubber O-rings in Cylinder Opening
2x Spare Plastic Gasket in Hose Fittings
Something you need but not included
SPECIFIC AC flush solution
Air compressor and hose
Wide Usage of AC Clean Tool Set
WHEN to use?
When you replace or retrofit AC system, or there is odorous smell from AC, or clean regularly refer to manufacturer’s recommendation and the AC system situation
WHERE to flush?
You can use this AC flush tool kit to deep flush each component individually including hose, condenser and evaporator. Do not flush the compressor, expansion valve, orifice tube, filter drier and accumulator. AC cleaning tool set also can be used to clean fuel pipe, and any other washable line such as household refrigerator AC line
WHAT are flushed away?
Old oil, refrigerant contaminants and residue, moisture, acid, dirt and something else. It depends on the solvent you’re using
NOTE
1.Please wear gloves and goggles when use
2.Use by professional or under the guidance of a professional
3.Always refer to equipment manufacturer’s operation instruction
4 Please wash the cylinder before first use, ensure there is no debris inside. After use, please clean up the residual solvent from the flush tool kit, dry and properly preserve
5.The hose and o-ring are made of rubber, please choose SPECIFIC AC flush solution which will not corrode rubber
6.Tighten all the components, insert the rubber tapered tip into pipe opening and hold it, then flush
7.Don’t exceed 150PSI
8.Disconnect air supply and release the air in the bottle before add new solution
WIDE USAGE OF JIFETOR AIR CONDITIONER FLUSH CYLINDER: When replace or retrofit AC system, or there is odorous smell from air conditioning, you can use this AC cleaning tool kit to deep flush each component individually including hose, condenser and evaporator. Do not flush the compressor, expansion valve, orifice tube, filter drier and accumulator. JIFETOR flush bottle set also can be used to clean fuel pipe, and any other washable line such as household refrigerator air conditioner line.
HOW IT WORKS: The air conditioning flush can, use shop air to pressurize and spray specific AC flush solvent, to flush old oil, refrigerant contaminants and residue, moisture, acid and dirt. The rubber tapered tip can be sealed against pipe opening and prevent backspray of solution. If the pipe opening is smaller than the rubber tapered tip, you can try to take the tapered tip off and insert the brass spray nozzle into the pipe.
OPERATION STEPS: When replace or retrofit AC system, you need recover the old refrigerant, disassemble AC system components, fill the flush canister with lightweight solution, assemble flush kit components and tighten, insert the tapered tip into line then flush and blow, assemble AC system component, vacuum leak check and recharge. There is a detailed instructions pasted on the bottle. Pay attention to pressure gauge index when using, please do not exceed 150PSI.
SATISFACTORY CUSTOMER SERVICE: JIFETOR complete AC flush kit includes 1 empty cylinder, 1 3-1/2FT hose with flush gun, and some spare fittings and o-rings. AC flush solution, air compressor and air hose are not included. 30 days full refund with returned undamaged JIFETOR product. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
